** ÈOW TO RETURN TO ÂÁÓÉÃ FROM ÃÏÍÁÌ

ÔYPE COMMAND:
   BASIC

** ÈOW TO SEE WHAT IS ON A DISK

ÐUT DISK INTO DRIVE. ÔYPE:
   CAT

ÔHE ÃÔÒÌ KEY SLOWS DISPLAY SCROLL.

** ÈOW TO RETRIEVE A PROGRAM FROM DISK

ÐUT DISK INTO DRIVE. ÆIND PROGRAM NAME
(SEE ÃÁÔ ABOVE). ÔYPE COMMAND (REPLACE
NAME WITH THE NAME OF THE PROGRAM YOU
WANT):
   LOAD "NAME"

** ÈOW TO RUN A PROGRAM ALREADY IN THE
COMPUTER

ÉSSUE COMMAND:
   RUN

** ÈOW TO RUN A PROGRAM FROM DISK

ÐUT DISK INTO DRIVE. ÔYPE COMMAND:
   CHAIN "NAME"

** ÈOW TO STOP A RUNNING PROGRAM

ÐRESS ÓÔÏÐ KEY. ÉF THAT DOESN'T WORK,
PRESS ÒÅÓÔÏÒÅ KEY AND ÓÔÏÐ KEY
SIMULTANEOUSLY (RESETS ÃÏÍÁÌ).

** ÈOW TO LOOK AT A PROGRAM

ÉF THE PROGRAM IS NOT IN THE COMPUTER,
FIRST ÌÏÁÄ THE PROGRAM:
   LOAD "NAME"

ÔO SEE A PROGRAM IN THE COMPUTER TYPE:
   LIST

ÔHE ÃÔÒÌ KEY SLOWS DOWN THE DISPLAY. ÔO
PAUSE IT, PRESS THE ÓÐÁÃÅ ÂÁÒ. ÐRESS
ÓÐÁÃÅ AGAIN TO RESUME.

** ÈOW TO WRITE A NEW PROGRAM

ÉSSUE COMMANDS:
   NEW
   AUTO

ÎOW, TYPE IN THE PROGRAM. ÈIT ÒÅÔÕÒÎ
TWICE IN A ROW TO STOP THE ÁÕÔÏ MODE.

** ÈOW TO ERASE LINES IN A PROGRAM

ÆIND THE LINE NUMBER OF THE LINE TO BE
ERASED (LINE 100 IN THIS EXAMPLE), THEN
ISSUE A ÄÅÌ COMMAND:
   DEL 100

ÙOU MAY DELETE A BLOCK OF LINES ALL AT
ONCE. ÆIND THE FIRST AND LAST LINE
NUMBERS IN THE BLOCK OF LINES (LINES
500 THRU 750 FOR THIS EXAMPLE), THEN
ISSUE A ÄÅÌ COMMAND:
   DEL 500-750

** ÈOW TO ADD LINES TO END OF A PROGRAM

ÔHE PROGRAM MUST BE IN THE COMPUTER.
ÆIND THE LAST LINE NUMBER CURRENTLY
USED (630 FOR THIS EXAMPLE). ÓPECIFY A
STARTING LINE THAT IS 10 MORE THAN THE
LAST LINE WITH THE COMMAND:
   AUTO 640

** ÈOW TO ADD LINES IN THE MIDDLE OF A
PROGRAM

ÔHE PROGRAM MUST BE IN THE COMPUTER.
ÌOCATE THE PLACE YOU WISH TO ADD A
LINE. ÆOR EXAMPLE, BETWEEN THE
FOLLOWING:

0040 ÐÒÉÎÔ "ÈELLO."
0050 ÐÒÉÎÔ "ÇOOD ÌUCK."

ÔYPE IN THE LINE TO ADD, USING A LINE
NUMBER BETWEEN THE TWO LINES.

45 ÐÒÉÎÔ "ÄO YOUR BEST."

ÎUMBERING A PROGRAM BY 10'S ALLOWS YOU
TO EASILY ADD UP TO 9 LINES BETWEEN ANY
CURRENT LINES.

** ÈOW TO RENUMBER A PROGRAM

ÔO RESTORE THE PROGRAM TO BE NUMBERED
BY 10'S, ISSUE COMMAND:
   RENUM

** ÈOW TO STORE A PROGRAM ON DISK

ÔYPE THE COMMAND:
   SAVE "NAME"

** ÈOW TO LIST A PROGRAM TO A PRINTER

ÔHE PROGRAM MUST BE IN THE COMPUTER.
ÉSSUE COMMANDS:
   SELECT "LP:"
   LIST

** ÈOW TO SET PRINTER AUTO LINEFEEDS

   LINEFEED+ // TURN ON
   LINEFEED- // TURN OFF

** ÈOW TO ACCESS DEVICE AND SEC ADDR

ÓEND OUTPUT TO PRINTER DEVICE 4,
SECONDARY ADDRESS 7 (LOWER CASE MODE):
   OPEN FILE 255,"LP:",UNIT 4,7,WRITE
   SELECT "LP:"

ÓEND OUTPUT TO DEVICE 5 PRINTER:
   OPEN FILE 255,"LP:",UNIT 5,WRITE
   SELECT "LP:"

ÁCCESS DISK DRIVE #9 RATHER THAN
DEFAULT #8 BY ADDING A ",9" AT THE END
OF SOME COMMANDS:
   SAVE "NAME",9
   LOAD "NAME",9
   CHAIN "NAME",9

** ÈOW TO FLIP TEXT / GRAPHICS SCREENS

ÉNITIALIZE THE GRAPHICS SCREEN THE
FIRST TIME (CHOOSE 0 OR 1):
   SETGRAPHIC 0 //  <-- HI RES
   SETGRAPHIC 1 //  <-- MULTI-COLOR

ÏNCE THE SCREEN IS CHOSEN, YOU CAN FLIP
BETWEEN GRAPHICS AND TEXT WITH THE
FUNCTION KEYS:
   F1 - FLIP TO TEXT SCREEN
   F3 - FLIP TO GRAPHICS SPLIT SCREEN
          WITH TEXT WINDOW AT TOP
   F5 - FLIP TO GRAPHICS SCREEN